Table of Contents
Advertisement
Enter a wireless password if necessary.
3.
Manually add your new network connection
Tap Add Wi-Fi network.
1.
Enter the Network SSID. This is the name of your Wireless
2.
Access Point.
Tap the Security field and select a security option. This
3.
must match the current security setting on your target
WAP.
If secured, you will also need to enter your WAP's
4.
password.
Tap Save to store the new information and connect to your
5.
target WAP.
Note: The next time your device connects to a previously accessed or
secured wireless network, you are not prompted to enter the WAP key
again, unless you reset your device back to its factory default settings.
Turning Wi-Fi Off
From the Home screen, tap
1.
and network
Wi-Fi settings.
125
Settings
Wireless
Tap the Wi-Fi field to deactivate the feature. The green
2.
checkmark will be removed.
Note: Use of wireless data connections such as Wi-Fi and Bluetooth can
cause an added drain to your battery and reduce your use times.
Manually Scan for a Wi-Fi Network
From the Home screen, tap
1.
and network
Wi-Fi settings.
Press
Scan.
2.
Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status at a
glance:
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point (WAP).
Displays when Wi-Fi is active but there is a
communication issue with the target Wireless Access
Point (WAP) or your device is not connected to a WAP.
Wi-Fi Advanced Settings
The Wi-Fi settings - Advanced menu allows you to set
up many of your device's Wi-Fi service, including:
Setting your Wi-Fi sleep policy
•
Settings
Wireless
Advertisement
Table of Contents
