Table of Contents
Advertisement
DAP-1360U Wireless N300 Access Point & Router
User Manual
IGMP
This page is available for the Router and WISP Repeater modes.
On the Advanced / IGMP page, you can allow the access point to use IGMP.
IGMP is used for managing multicast traffic (transferring data to a group of destinations). This
protocol allows using network resources for some applications, e.g., for streaming video, more
efficiently.
The following elements are available on the page:
Parameter
Enable
IGMP version
Interface
After specifying the needed parameters, click the APPLY button.
Figure 101. The Advanced / IGMP page.
Move the switch to the right to enable IGMP.
Select a version of IGMP from the drop-down list.
From the drop-down list, select a connection of the Dynamic IPv4 or
Static IPv4 type for which you need to allow multicast traffic (e.g.
streaming video).
Page 125 of 158
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
