Table of Contents
Advertisement
DAP-1360U Wireless N300 Access Point & Router
User Manual
Parameter
The MAC address of
this point in 2.4 GHz
AP MAC
The WDS function parameters specified on the page must be the same for all
!
interconnected devices. In addition, it is required to set the same channel (on the Wi-Fi /
Basic settings page).
When you have configured the parameters, click the APPLY button.
The MAC address of the access point.
The MAC addresses of devices connected to the access point via the
WDS function.
To specify several MAC addresses, click the ADD button, and in the
line displayed, enter a MAC address.
To remove the MAC address, click the Delete icon ( ) in the line
of the address.
Page 93 of 158
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
