Table of Contents
Advertisement
DAP-1360U Wireless N300 Access Point & Router
User Manual
VLAN
This page is available for the Router and WISP Repeater modes.
On the Advanced / VLAN page, you can create and edit groups of ports for virtual networks
(VLANs).
By default, 2 groups are created in the access point's system:
lan: it includes ports 1-4. You cannot delete this group.
•
wan: for the WAN interface; it includes the WAN port. You can edit or delete this group.
•
If you want to create a group including LAN ports of the access point, first delete relevant records
from the lan group on this page. To do this, select the lan group. On the opened page, in the
Untagged Ports section, deselect the checkbox located to the left of the relevant port, and click
the APPLY button.
To create a new group for VLAN, click the ADD button (
Figure 86. The Advanced / VLAN page.
Page 110 of 158
Configuring via Web-based Interface
).
Advertisement
Table of Contents
