Table of Contents
Advertisement
DAP-1360U Wireless N300 Access Point & Router
User Manual
Figure 66. Configuring the local interface. The IPv4 tab. The Dynamic IP Addresses section.
Parameter
Mode of dynamic IP
address assignment
Start IP
End IP
Lease time
Dynamic IP Addresses
An operating mode of the access point's DHCP server.
Disable: the access point's DHCP server is disabled, clients' IP
addresses are assigned manually.
DHCP server: the access point assigns IP addresses to clients
automatically in accordance with the specified parameters. When
this value is selected, the Start IP, End IP, Lease time fields and
the DNS relay switch are displayed on the tab.
DHCP relay: an external DHCP server is used to assign IP
addresses to clients. When this value is selected, the External
DHCP server IP and Option 82 Remote ID fields are displayed
on the tab. For the Router and WISP Repeater modes only.
The start IP address of the address pool used by the DHCP server to
distribute IP addresses to clients.
The end IP address of the address pool used by the DHCP server to
distribute IP addresses to clients.
The lifetime of IP addresses leased by the DHCP server. At the end
of this period the leased IP address is revoked and can be distributed
to another device, unless the previous device has confirmed the need
to keep the address.
Page 76 of 158
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
