Table of Contents
Advertisement
Icon
Description
Grey icon:
System interrupted.
Icon flashes grey:
The requirements for system operation
are no longer being met.
The system has been deactivated but
will continue to brake until you actively
take over by depressing the brake or
accelerator pedal.
Vehicle icon flashes red and an acous‐
tic signal sounds:
Brake and take avoidance manoeuvre if
necessary.
Displays in the Head-up display
Set speed
Depending on the equipment, some system in‐
formation can also be displayed in the Head-up
display.
Distance information
The icon is shown if your vehicle is too
close to the vehicle ahead.
The distance information is active under the
following circumstances:
▷
Cruise control with distance control is turned
off.
▷
Display in the Head-up display selected.
Head-up display, see page 173.
▷
Distance too close.
▷
Speed above approximately 70 km/h,
40 mph.
Preventing overtaking
Depending on the equipment and national-mar‐
ket version, the function assists in avoiding unin‐
tended overtaking on motorways.
Driver assistance systems
Online Edition for Part no. 01405A38CB9 - VI/21
The system can be set to avoid overtaking in the
slower lane.
The setting applies to speeds exceeding
80 km/h/50 mph.
If the set speed is significantly higher than the
speed in the adjacent lane, passing or overtaking
may still be possible even if the function is
switched on.
At speeds below 80 km/h/50 mph, vehicles on
motorways are only overtaken with an adjusted
differential speed.
The driver can overtake or accelerate at any time
by pressing the accelerator pedal.
Turning the function on/off:
1.
Press the button.
2.
"Driver assistance"
3.
"Driving"
4.
"Distance control"
5.
Depending on the national-market version:
▷
"Avoid overtaking on the left"
▷
"Avoid overtaking on the right"
System limits
System limits of the sensors
For further information:
▷
Cameras, see page 48.
▷
Radar sensors, see page 49.
CONTROLS
237
Advertisement
Table of Contents
