Table of Contents
Advertisement
and when trains or ships are close to the
road, or when animals are crossing the road.
▷
On tight bends, on steep brows or hollows of
hills, when there is crossing traffic or if the
view of oncoming vehicles on a motorway is
partly obstructed.
▷
In poorly lit towns or where there are highly
reflective signs.
▷
If the area of windscreen in front of the inte‐
rior mirror is covered with condensation, dirt,
stickers, labels, etc.
Laser high-beam headlight
Principle
The headlight range of the high-beam headlight
is increased and provides better illumination of
the road.
General
When the high-beam headlight is switched on,
the laser high-beam headlight is switched on au‐
tomatically in addition to LED high-beam head‐
light from a speed of approximately 60 km/h,
37 mph.
Depending on the national-market version, addi‐
tional information may be found on the laser sign
on the headlight.
Fog lights
Rear fog light
Operating requirements
The low-beam headlight must be switched on
before the rear fog light can be activated.
Switching the rear fog light on/off
Press the button.
Online Edition for Part no. 01405A38CB9 - VI/21
Lights
The yellow indicator lamp in the instru‐
ment cluster illuminates when the rear
fog light is switched on.
If automatic driving lights control has been acti‐
vated, the low-beam headlights switch on auto‐
matically when the rear fog light is switched on.
Bad weather light
Principle
The bad weather light provides optimised illumi‐
nation of the road when visibility conditions are
poor, for example in fog or rain. The light distribu‐
tion from the low-beam headlight is adapted to
the visibility conditions.
Operating requirements
▷
Driving lights automatic is active.
▷
Rear fog light is switched on.
Left-hand/right-hand traffic
General
When driving in countries where vehicles drive
on the opposite side of the road to your vehicle's
country of registration, you will need to prevent
your headlights from dazzling oncoming vehicles.
Converting the headlights
1.
Press the button on the light switch
element.
2.
"Additional settings"
3.
"Right/left-hand traffic"
4.
Select the desired setting.
System limits
High beam assistant may only function to a limi‐
ted extent.
CONTROLS
181
Advertisement
Table of Contents
