Assisted Driving; Yellow Lights; Flat Tyre Monitor Rpa - BMW iX Owner's Handbook Manual

Assisted Driving

Indicator light flashes and an acoustic
signal sounds: the system is switching
off.
For further information:
Assisted Driving, see page 239.

Yellow lights

Assisted Driving
Indicator light illuminates and an acoustic
signal may sound: a system interruption
is imminent.
Indicator light flashing: lane boundary has been
driven over.
For further information:
Assisted Driving, see page 239.
Anti-lock Braking System ABS
Avoid sudden braking. Bear in mind that
stopping distances will be longer.
System failure. Ease of steering is re‐
stricted during emergency braking.
Have the vehicle checked immediately by a Serv‐
ice Partner of the manufacturer or another quali‐
fied Service Partner or a specialist workshop.
Front-collision warning
Depending on the national-market ver‐
sion: the system is restricted or failed.
Depending on the national-market ver‐
sion: the system is deactivated.
For further information:
Front-collision warning, see page 189.
Dynamic Stability Control
Indicator light flashes: Dynamic Stability
Control controls the drive and brake
Online Edition for Part no. 01405A38CB9 - VI/21
Displays
forces. The vehicle is being stabilised. Decrease
speed and adjust driving style to the road condi‐
tions.
Indicator light is illuminated: Dynamic Stability
Control malfunction or initialising. No driving sta‐
bilisation.
Have the system checked immediately by a
Service Partner of the manufacturer or another
qualified Service Partner or a specialist work‐
shop.
For further information:
Dynamic Stability Control, see page 223.
Dynamic Stability Control restricted or
increased driving dynamics activated
Dynamic Stability Control is restricted or
increased driving dynamics is activated.
For further information:
▷ Dynamic Stability Control, see page 223.
▷ Setting for increased driving dynamics, see
page 224.

Flat tyre monitor RPA

RPA reports a tyre pressure loss in a tyre.
Reduce your speed and carefully stop
the vehicle. Avoid heavy braking and
sudden steering manoeuvres.
For further information:
Flat tyre monitor RPA, see page 348.
Tyre Pressure Monitor
Indicator light illuminates: the Tyre Pres‐
sure Monitor is reporting a low tyre infla‐
tion pressure or a flat tyre. Note the infor‐
mation in the Check Control message.
Indicator light flashes and then illuminates con‐
tinuously: the system is unable to detect flat
tyres or tyre pressure losses.
▷ Fault due to systems or devices with the
same radio frequency: the system is auto‐
CONTROLS
159