Vehicle Identification Number; Under The Bonnet; Safety Note; Opening Bonnet - BMW iX Owner's Handbook Manual

Hide thumbs Also See for iX:
Table of Contents

Advertisement

To request deactivation, please contact a Serv‐
ice Partner of the manufacturer or another quali‐
fied Service Partner or a specialist workshop.
The eCall statutory emergency call system is al‐
ways on standby in addition to the intelligent
emergency call system. The eCall statutory
emergency call system takes over the emer‐
gency call function if the intelligent emergency
call system is not operational for technical rea‐
sons, for example if the emergency call centre
appointed by the vehicle manufacturer cannot be
reached.
The eCall statutory emergency call system uses
the infrastructure of the 112 public emergency
call number.
The system can be configured so that emer‐
gency calls are always made via the eCall statu‐
tory emergency call system and not via the intel‐
ligent emergency call system. Have the setting
configured by a Service Partner of the manufac‐
turer or another qualified Service Partner or a
specialist workshop.

Vehicle identification number

General
Depending on the national-market equipment,
the vehicle identification number is located at dif‐
ferent positions in the vehicle. This chapter de‐
scribes all the positions that are possible for the
model range.

Under the bonnet

The vehicle identification number is engraved
under the bonnet, on the right-hand side of vehi‐
cle.
The bonnet must only be opened by a manufac‐
turer Service Partner or another qualified Service
Partner or specialist workshop.
Online Edition for Part no. 01405A38CB9 - VI/21
Notes

Safety note

WARNING
Work performed incorrectly under the bonnet
can damage components and lead to a safety
risk. There is a risk of accident or material dam‐
age. Have work under the bonnet carried out by
a Service Partner of the manufacturer or an‐
other qualified Service Partner or a specialist
workshop.

Opening bonnet

To open the bonnet, proceed as follows:
1.
Remove the wire loop out of the opening of
the instrument panel.
2.
Pull on the wire loop. Left bonnet lock is un‐
locked.
3.
Repeat on the right side of the vehicle.
4.
The bonnet is now unlocked and can be
opened.
NOTES
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

I4 gran coupe 2021

Table of Contents