Table of Contents
Advertisement
CONTROLS
Safety notes
WARNING
The system does not relieve you of your per‐
sonal responsibility to assess the visibility con‐
ditions and traffic situation correctly. There is a
risk of accident. Adapt your driving style to the
traffic conditions. Observe the traffic situation
and intervene actively if the situation warrants it.
WARNING
Displays and warnings do not relieve you of
your personal responsibility. System limitations
can mean that warnings or system responses
are not issued or are issued too late, incorrectly
or without justification. There is a risk of acci‐
dent. Adapt your driving style to the traffic con‐
ditions. Observe the traffic situation and inter‐
vene actively if the situation warrants it.
Operating requirements
The lane markings must be detected by the
camera in order for the side collision warning
with steering intervention to be active.
Overview
Sensors
The system is controlled using the following sen‐
sors:
▷
Camera behind the windscreen.
▷
Side radar sensors, front.
▷
Side radar sensors, rear.
For further information:
Sensors in the vehicle, see page 48.
210
Safety
Online Edition for Part no. 01405A38CB9 - VI/21
Turning the side-collision warning
on/off
Turning on the system automatically
The side collision warning is activated automati‐
cally at the start of a journey if the function was
switched on at the end of the last journey.
Turning the system on/off manually
1.
Press the button.
2.
"Driver assistance"
3.
"Safety and warnings"
4.
"Side collision warning"
5.
Select the desired setting.
Adjusting the strength of the steering
wheel vibration
1.
Press the button.
2.
"Driver assistance"
3.
"Feedback via steering wheel"
4.
"Vibration intensity"
5.
Select the desired setting.
The setting is applied to all collision warning sys‐
tems.
Advertisement
Table of Contents
