Important Safety Instructions; Notes On Installing; Notes On Handling - Epson SC-R5000 Series Setup Manual

Safety Instructions
EN

Important Safety Instructions

Read all of these instructions before using the printer. Also be sure to follow all warnings and
instructions marked on the printer.

Notes on Installing

Do not obstruct the vents on the product.
If the vents are obstructed, the internal temperature could rise and cause a fire. Do not cover the
printer with a cloth or install it in a location with poor ventilation. Make sure you secure sufficient
space for the installation as described in the manual.
U "Instructions for Placing the Printer" on page 11
Do not setup or use this product in an area where children may come close.
Children may be injured by the equipment.
Use the printer in a location with sufficient ventilation.
The odors or vapors from the ink, waste ink,
feel unwell. Take the following measures if you start to feel unwell.
❏ Move to a location with fresh air.
❏ Wear a protective mask.
❏ If you have difficulty breathing or if someone's breathing stops, perform artificial respiration and
consult a physician immediately.
Do not install or store the printer in an unstable location or a location subject to vibrations from
other equipment.
The printer could fall or tip over and cause an injury.
Do not install the printer in locations subject to oily smoke and dust, or in locations subject to
humidity or where it could easily get wet.
An electric shock or fire could occur.
Do not tilt the product more than 10 degrees forward, back, left, or right while moving it.
Failure to observe this precaution could result in the printer falling over, causing accidents.
Because the product is heavy, it should not be carried by one person.
Ten people are needed to unpack or carry the printer. See the following for details on the product's
weight.
U "Instructions for Placing the Printer" on page 11
When lifting the product, make sure you lift at the locations indicated in the manual.
If you lift holding other parts, the printer may fall, catching your fingers and causing an injury. See
the following for details on lifting the product.
U "Printer Installation" on page 16
Make sure you use the correct posture when lifting the product.
Lifting using the wrong posture could cause an injury.
!
Warning
cleaning liquid, or cleaning fluid could cause you to
!
Caution
Before assembling the product, make sure you clear away the packaging sheets, packing
materials, and supplied items from the installation area.
If you slip or trip on these items, it could cause an injury.
When placing the product on a stand with casters (wheels), make sure you secure the casters
before you perform the work so that they do not move.
If the stand moves while you are performing the work, it could cause an injury.
Do not try to move the stand while the casters (wheels) and adjusters are secured.
Failure to observe this precaution could result in the printer falling over, causing accidents.
When moving the printer while it is on the stand, avoid locations with steps or uneven flooring.
Failure to observe this precaution could result in the printer falling over, causing accidents.
Check the installation procedure for the overturn-prevention plates, which are provided with
the ink unit, and be sure to attach both of the 2 plates.
There is a risk of accidents caused by overturning, etc.

Notes on Handling

Do not use the printer in locations with volatile substances such as alcohol or thinner, or near
naked flames.
An electric shock or fire could occur.
Do not use the printer if it is giving off smoke or if you notice any abnormal odors or noises.
An electric shock or fire could occur. If any abnormalities occur, turn off the power and unplug the
power cable immediately, and then contact your dealer or Epson Support.
Never try to repair the printer yourself as this is extremely dangerous.
Do not use the printer in an environment where flammable gas or explosive gas may exist. Do
not use sprays that contain flammable gas inside or near the product.
A fire could occur.
Only route the cables as indicated in the manual.
A fire could occur. This could also cause damage to connected devices.
Do not insert or drop any metallic or flammable items into the openings on the printer.
An electric shock or fire could occur.
Do not touch any areas inside the printer except for those indicated in the manual.
An electric shock or burn could occur.
Do not disassemble anything except when indicated to do so in the manual.
!
Caution
!
Warning
5