Analog Input Channel - Siemens SIPLUS CMS4000 Operating Instructions Manual

Operating Instructions SIPLUS CMS4000 IFN AI-D
4.2.5

Analog Input Channel

Connect the sensors / process signals to the 5-pin circular plug M12 (CH1-CH6) on the
front side of the device.
Chart 7 Channel 1-6, see chapter 6.2
CH1 Analog Input 1
CH2 Analog Input 2
CH3 Analog Input 3
CH4 Analog Input 4
CH5 Analog Input 5
CH6 Analog Input 6
Connector assignment analog input (CH1-CH6)
Chart 8 Connector assignment analog input (CH1-CH6)
PIN Assignment
1 M (earth)
2 free
3 Signal
4 free
5 free
Shielding measurement CH1-CH6
Caution
Use only shielded lines, where the shielding is applied to one side of the IFN AI-D plug housing!
SIPLUS CMS4000 IFN AI-D
Operating Instructions, 07/2021, A5E32612781A-AB
Wire color Display
brown
white
blue
black
grey or
green/yellow
21