Uik (Unique Identification Key); Diagnosis Via Led-Indicator - Siemens SIPLUS CMS4000 Operating Instructions Manual

Operating Instructions SIPLUS CMS4000 IFN AI-D
5.1.4

UIK (Unique Identification Key)

The UIK is a clear, device dedicated identification/address. It is printed on the UIK label
plate and deposited in the firmware of the IFN AI-D. The device is addressed with the
UIK.
In order to communicate with the IFN AI-D, the UIK must be dedicated during the pa-
rameterization in X-Tools (see manual „SIPLUS CMS X-Tools reference manual").
5.2

Diagnosis via LED-Indicator

Name
Description
Color
Condition off
blinks
Name
Description
Color
Condition off
on
Name
Description
Color
Condition off
on
blinks
Name
Description
Color
Condition off
blinks
SIPLUS CMS4000 IFN AI-D
Operating Instructions, 07/2021, A5E32612781A-AB
PWR
power Indicator
green
no operation voltage
firmware operates
ERR
error Indicator
red
no error
error
LNK
indicator for connection to the controller
yellow
no connection to the controller
connection to the controller established
data exchange with the controller
CH1-6
error indicator for sensor input CH1-CH6
red
channel is not over parameterization on or no error
sensor cable break
24