Ifn Ai-D; Connecting Ifn Ai-D To The Ground (Shield) - Siemens SIPLUS CMS4000 Operating Instructions Manual

Operating Instructions SIPLUS CMS4000 IFN AI-D
4.2

IFN AI-D

4.2.1

Connecting IFN AI-D to the ground (SHIELD)

The earth connection has to be implemented with cable cross section of 2.5mm
1. Isolate the grounding cable and squeeze a cable lug at the end of the line (M4 ring
eye).
2. Screw the cable lug to the device as shown in the picture. The recommended torque
is 3 Nm
Picture 8 Connecting to ground (SHIELD)
SIPLUS CMS4000 IFN AI-D
Operating Instructions, 07/2021, A5E32612781A-AB
2
16