Sfp+ Direct Attach Copper Cables For Ex Series Switches; Cable Specifications; Figure 22: Sfp+ Direct Attach Copper Cables For Ex Series Switches; Table 26: Software Support For Sfp+ Passive Direct Attach Copper Cables For Ex Series Switches - Juniper EX9200 Manual

Hardware Topics for Aloha Line Card

SFP+ Direct Attach Copper Cables for EX Series Switches

Cable Specifications

Table 26: Software Support for SFP+ Passive Direct Attach Copper Cables for EX Series Switches

Switch Software Support Added
EX2300 switches Junos OS Release 16.1R1
EX3200 switches Junos OS Release 10.3
EX3400 switches Junos OS Release 16.1R1
62
EX9200-40T Line Card on page 31
EX9200-40F Line Card on page 28
EX9200-40F-M Line Card on page 30
Small form-factor pluggable plus transceiver (SFP+) direct attach copper (DAC) cables,
also known as Twinax cables, are suitable for in-rack connections between servers and
switches. They are suitable for short distances of up to 23 ft (7 m), making them ideal
for highly cost-effective networking connectivity within a rack and between adjacent
racks. See Figure 22 on page

Figure 22: SFP+ Direct Attach Copper Cables for EX Series Switches

This topic describes:
Cable Specifications on page 62
Standards Supported by These Cables on page 67
EX Series switches support SFP+ passive DAC cables. The passive Twinax cable is a
straight cable with no active electronic components. EX Series switches support 1 m,
3 m, 5 m, and 7 m long SFP+ passive DAC cables.
Table 26 on page 62 describes the support for SFP+ passive DAC cable lengths on
EX Series switches for Junos OS releases.
62.
Cable Length
3 ft (1 m), 10 ft (3 m), and 16 ft (5 m)
3 ft (1 m), 10 ft (3 m), 16 ft (5 m), and 23 ft (7 m)
3 ft (1 m), 10 ft (3 m), 16 ft (5 m), and 23 ft (7 m)
Copyright © 2016, Juniper Networks, Inc.