Setting The Tx Line Priority - Canon 700 Series Facsimile Manual

NOTE
If your document receptions are slow in starting, this may mean that the telephone
lines in your area are in poor condition. Select a slower speed. You can select
'33600bps', '14400bps', '9600bps', '7200bps', '4800bps', or '2400bps'.
15
Press [
Set
16
Enter the telephone number, select the telephone line type,
and set the transmission and reception start speed for Line 2
in the same manner as described in steps 7 to 14.
17
Stop
Press [Stop] to return to the Standby mode.

Setting the TX Line Priority

This section describes how to set the TX line priority of the two lines. You can set to
have the machine automatically select the line or you can manually select the line
when you send a fax.
1
Open all three one-touch speed dialing panels.
2
Data
Press [Data Registration].
Registration
] until <2. LINE 2> appears ➞ press [Set].
▼ ▲
] or [
➞
Using the Optional Dual Line
1
1-33