Setting Up And Using The Optional Stamp Feature; Setting Up The Stamp Feature - Canon 700 Series Facsimile Manual

Setting Up and Using the Optional Stamp Feature

If the optional stamp feature is provided on your machine, you can set the machine
to stamp the front, lower left corner of every page you scan for sending.

Setting Up the Stamp Feature

Follow this procedure to set up the stamp feature.
IMPORTANT
1
2
Data
Registration
3
Set
10
4
Set
10-18

Setting Up and Using the Optional Stamp Feature

The stamp feature is available as an option. If the stamp option is not provided on your
machine, you cannot access this setting.
Open all three one-touch speed dialing panels.
Press [Data Registration].
] until <3.FAX SETTINGS> appears ➞ press
▼ ▲
Press [ ] or [
[Set].
] until <7.SYSTEM SETTINGS> appears ➞ press
▼ ▲
Press [ ] or [
[Set].
If the prompt <SYSTEM SETTINGS PASSWORD> is displayed, enter the System
Administrator's password using the numeric keys ➞ press
➞
➞
Set
(Set).