Step 4: Making Setting Adjustments Before Recording - Sony Handycam DCR-SR35E Handbook

Step 4: Making setting adjustments before recording

Opening the LENS COVER manually
Slide the LENS COVER switch to open.
LENS COVER switch
 Tips
When you finish recording or when you play

back images, close the LENS COVER.
Adjusting the LCD panel
Open the LCD panel 90 degrees to the
camcorder (), then rotate it to the best
angle to record or play ().
90 degrees to the
90 degrees
camcorder
(max.)
180 degrees
DISP/BATT INFO
(max.)
To turn off the LCD backlight to make the
battery last longer
Press and hold DISP/BATT INFO for a few
seconds until appears.
This setting is practical when you use
your camcorder in bright conditions or
when you want to save battery power. The
recorded image will not be affected by the
setting. To turn on the LCD backlight,
press and hold DISP/BATT INFO for a few
seconds until disappears.

Notes
Do not press the buttons on the LCD frame

accidentally when you open or adjust the LCD
panel.
Tips

If you rotate the LCD panel 180 degrees, you

can close the LCD panel with the LCD screen
facing out. This is convenient during playback
operations.
(HOME) 
Touch

[SOUND/DISP SET]  [LCD BRIGHT]
(p. 64), and adjust the brightness of the LCD
screen.
The information is displayed or hidden (display

 no display) each time you press DISP/
BATT INFO.
Fastening the grip belt
Fasten the grip belt and hold your
camcorder correctly.
(SETTINGS) 
19