Opening The Lens Cover Manually; Adjusting The Lcd Panel; Fastening The Grip Belt; Step 4: Making Setting Adjustments Before Recording - Sony Handycam DCR-SR45 Operating Manual

Step 4: Making setting adjustments before recording
Openingthe LENS COVER manually
Slide the LENS COVER switch to open.
. ~ Tips
• When you finish recording or when you play
back images, close the LENS COVER.
" Notes
• Do not press the buttons on the LCD frame
accidentally when you open or adjust the LCD
panel.
.~.
Tips
• If you rotate the LCD panel 180 degrees, you
can close the LCD panel with the LCD screen
facing out. This is convenient during playback
operations.
• Touch
A
(HOME)
~
iii
(SETTINGS)
~
[SOUND/DISP SET] ~ [LCD BRIGHT]
(p. 64), and adjust the brightness of the LCD
screen.
• The information is displayed or hidden (display
+-+
no display) each time you press DISPI
BATT INFO.
•
A,dj~stlng
the LCD pai1el
Fastening the grip belt
Open the LCD panel 90 degrees to the
camcorder
<CD),
then rotate it to the best
angle to record or play
<@).
CD90 degrees to the
@90degrees camcorder
(max.)
Fasten the grip belt and hold your
camcorder correctly.
@180 deg rees
(max.)
DISP/BATI INFO
To turn off the LCD backlight to make the
battery last longer
Press and hold DISP/BATT INFO for a few
seconds until
:qh:
appears.
This setting is practical when you use
your camcorder in bright conditions or
when you want to save battery power. The
recorded image will not be affected by the
setting. To turn on the LCD backlight,
press and hold DISP/BATT INFO for a few
seconds until
:qh:
disappears.
19