It takes a few seconds for your camcorder to
be ready to shoot after the power is turned on.
You cannot operate your camcorder during this
time.
In the default setting, the power turns off
automatically if you leave your camcorder
unoperated for approximately 5 minutes, to
save battery power ([A.SHUT OFF], p. 67).
Tips
The date and time do not appear during
recording, but they are automatically recorded
on the media, and can be displayed during
playback ([DATA CODE], p. 62).
Refer to page 88 for information concerning
"World time difference."
If the buttons on the touch panel do not
work correctly, adjust the touch panel
[CALIBRATION] (p. 93).
Changing the language setting
You can change the on-screen displays to
show messages in a specified language.
(HOME)
Touch
LANG] [
[CLOCK/
SET], then select the desired language.
18
(SETTINGS)
LANGUAGE