Sony Handycam DCR-SR35E Handbook page 84

(Warning indicator pertaining to
"Memory Stick PRO Duo")
Slow flashing
Free space for recording images are

running out. For the type of "Memory
Stick" you can use with your camcorder,
see page 2.
No "Memory Stick PRO Duo" is inserted

(p. 21).
Fast flashing
There are not enough free space for

recording images. Delete unnecessary
images, or format the "Memory Stick PRO
Duo" after storing the images on other
media (p. 36, 37, 52).
The Image Database File is damaged

(p. 54).
(Warning indicators pertaining to
"Memory Stick PRO Duo" formatting)*
The "Memory Stick PRO Duo" is damaged.

The "Memory Stick PRO Duo" is not

formatted correctly (p. 52, 90).
(Warning indicator pertaining to
incompatible "Memory Stick Duo")*
An incompatible "Memory Stick Duo" is

inserted (p. 90).
 (Warning indicator pertaining to
the write-protect of the "Memory Stick
PRO Duo")*
Access to the "Memory Stick PRO Duo"

was restricted on another device.
(Warning indicator pertaining to the
flash)
Fast flashing
There is something wrong with the flash.

(Warning indicator pertaining to
camera-shake warning)
The amount of light is not sufficient, so

camera-shake easily occurs. Use the flash.
8
The camcorder is unsteady, so camera-

shake easily occurs. Hold the camcorder
steady with both hands and record the
image. However, note that the camera-
shake warning indicator does not
disappear.
(Warning indicator pertaining to
drop sensor)
The drop sensor function (p. 67) is

activated, and has detected that the
camcorder has been dropped.
Therefore, the camcorder is taking steps to
protect the hard disk.
Recording/playback may be disabled as a
result.
The drop sensor function does not

guarantee the protection of the hard disk
under all possible situations. Use the
camcorder under stable conditions.
(Warning on recording still images)
Still images cannot be recorded during

processing. Wait for a while, then record.
* You hear a melody when the warning
indicators appear on the screen (p. 64).
Description of warning messages
If messages appear on the screen, follow the
instructions.

Media
HDD format error.
The hard disk of the camcorder is set

differently from the default format.
Performing [MEDIA FORMAT] (p. 52)
may enable you to use your camcorder.
This will delete all data in the hard disk.