Setting To Cool Or Heat Only Mode, Checking And Cool/Heat Modes Operation Test - Samsung AR07TSFABWKN Service Manual

4-5 Setting to Cool or Heat only mode, checking and Cool/Heat modes operation test

Setting the outdoor option
•
Press and hold K2 to enter the option setting. (Only available when the operation is stopped)
- If you enter the option setting, display will show the following.
- Seg 1 and Seg 2 will display the number for selected option.
- Seg 3 and Seg 4 will display the number for set value of the selected option.
• Edited option will not be saved if you do not end the option setting as explained in above instruction.
※ While you are setting the option, you may press and hold the K1 button to reset the value to previous setting.
CAUTION
※ If you want to restore the setting to factory default, press and hold the K4 button while you are in the option
setting mode.
– If you press and hold the K4 button, setting will be restored to factory default but it doesn't mean that restored
setting is saved. Press and hold the K2 button. When the segments shows that tracking mode is in progress,
setting will be saved.
•
If you have selected desired option, you can shortly press the K1 switch to adjust the value of the Seg 1, Seg 2 and change the
function for the selected option.
Example)
•
If you have selected desired option, you can shortly press the K2 switch to adjust the value of the Seg 3, Seg 4 and change the
function for the selected option.
Example)
•
After selecting the function for options, press and hold the K2 switch for 2 seconds. Edited value of the option will be saved
when entire segments blinks and tracking mode begins.
Option item Input unit
Setting to Cool or Heat
only mode
Unused option
Mixed mode indoor
input
Auto Change Over
Channel address
• Edited option will not be saved if you do not end the option setting as explained in above instruction.
※ While you are setting the option, you may press and hold the K1 button to reset the value to previous setting.
CAUTION
※ If you want to restore the setting to factory default, press and hold the K4 button while you are in the option
setting mode.
‐ If you press and hold the K4 button, setting will be restored to factory default but it doesn't mean that restored
setting is saved. Press and hold the K2 button. When the segments shows that tracking mode is in progress,
setting will be saved.
SEG1 SEG2 SEG3
Main 0 0
Main 0 1
Main 0 2
Main 0 3
Main 0 4
SEG4
0 0 Cooling and Heating (Factory default)"
0 1 Only Cooling
0 2 Only Heating
0 0 Unused option
0 1 Unused option
0 0 Disabled (Factory default)
0 1
0 0 Disabled (Factory default)
0 1 Enabled (Factory default)
A U Automatic setting (Factory default)
00 ~ 15 Manual setting
4-39
Troubleshooting
Function
Enabled