Making Wi-Fi Settings By Push Button Setup - Epson WF-110 Series Manual

User's Guide
6. Enter the password.
Select whether or not you print a network connection report after finishing the settings.
Note:
❏ The password is case-sensitive.
❏ If you do not know the network name (SSID) check if the information is written on the label of the wireless router. If
you are using the wireless router with its default settings, use the SSID on the label. If you cannot find any
information, see the documentation provided with the wireless router.
7. When you have setup finished, and then press the
Note:
If you fail to connect, load paper, and then press the OK button to print a network connection report.
Related Information
"Entering Characters" on page 22
&
"Checking the Network Connection Status" on page 41
&
"When You Cannot Make Network Settings" on page 130
&

Making Wi-Fi Settings by Push Button Setup

You can automatically set up a Wi-Fi network by pressing a button on the wireless router. If the following
conditions are met, you can set up by using this method.
❏ The wireless router is compatible with WPS (Wi-Fi Protected Setup).
❏ The current Wi-Fi connection was established by pressing a button on the wireless router.
1. Select Wi-Fi Setup on the home screen.
To select an item, use the
2. Select Wi-Fi (Recommended).
3. Press the OK button to proceed.
4. Select Push Button Setup (WPS).
5. Hold down the [WPS] button on the wireless router until the security light flashes.
Network Settings
u d l r
buttons, and then press the OK button.
button.
40