Epson WF-110 Series Manual page 24

User's Guide
Menu
Plain Paper Density
Setting
Color Adjustment
Printer Setup
Network Settings
Printer Basics
Settings and Explanations
Increases the print density when the paper type is set to plain paper and the quality is set to
standard. However, the print speed may be slower.
Make fine color adjustments when printing. Select +1 to make the colors darker, and select -1 to
make the colors lighter.
This setting is reset when the ink cartridge is removed.
Paper Source Settings
Power Off Timer
Quiet Mode
Language
Keyboard
Sleep Timer
Others
Print Status Sheet
Wi-Fi Setup
Connection Check
Paper Setup
Paper Setting Alert
Paper Configuration
External Power
Battery Power
Reduce noise during printing.
However, the print speed may be slower.
Select the display language.
Change the layout of the keyboard on the LCD screen.
Select the time period before the printer enters sleep mode (energy
saving mode) when no operations are performed.
The LCD screen turns black when the set time passes.
Printer Swapping
Prints the network settings and connection status.
Displays the same items as when you select Wi-Fi Setup on the
home screen. See the description of Wi-Fi Setup.
Checks the status of the network connection and prints the network
connection check report. If there are any problems with the
connection, see the check report to solve the problem.
24
Select the paper size and paper type
you loaded in the rear paper feed.
Displays an error message when the
paper size or type settings in Paper
Setup and the print settings do not
match.
Automatically displays the paper
settings screen when paper is loaded.
AirPrint is not available when disabled.
You can adjust the time before power
management is applied. Any increase
will affect the product's energy
efficiency. Please consider the
environment before making any
change.
If the printer driver for this printer is
already installed on the computer, this
setting prevents it from being installed
again even if another printer with the
same product name is connected using
a USB cable. This setting is enabled the
next time you restart the printer.