Sony DVP-S9000ES Operating Instructions Manual page 41

Selecting a video control setting to be
applied during playback
1
Select VIDEO CONTROL using M /m , then press
ENTER.
1 2 ( 2 7 )
1 8 ( 3 4 )
C 1 : 3 2 : 5 5
PB MEMORYt
PB MEMORYt
MEMORY 1t
MEMORY 2t
VIDEO CONTROL
Select:
2
Select the video control setting you want to apply
during playback using M /m , then press ENTER.
The VIDEO CONTROL display appears.
PB MEMORY
VIDEO CONTROL
BLOCK NR
Y NR
C NR
CHROMA DELAY
Select: Cancel:
ENTER
3
Confirm the setting and press ORETURN.
Playback starts according to the selected setting.
z
To make additional changes to the selected setting
When "VIDEO CONTROL" is displayed in step 2, select the item
you want to adjust using M/m, then press ENTER. You can now
adjust the item.
The new setting can be saved to the Playback Memory for the
current disc regardless of the video control setting (PB
MEMORYt or MEMORY 1 to 5). However, the original
MEMORY 1 to 5 settings will not change.
Notes
• If you remove the disc or press ?/1 on the remote and place
the player in standby mode when "PLAYBACK MEMORY" is
set to "ON" in the "CUSTOM SETUP" display, the current PB
MEMORYt or MEMORY 1 to 5 settings are saved to Playback
Memory for the current disc.
• If you have selected MEMORY 1 to 5 but do not want to change
the Playback Memory setting for the current disc, select PB
MEMORYt before removing the disc or pressing ?/1 on the
remote to place the player in standby mode.
DVD
Cancel:
ENTER RETURN
0
0
0
0
1/3
RETURN
To adjust the picture items
You can adjust each element of the picture individually
and save the adjustments to each disc (Playback Memory)
or to one of the five settings (Memory 1 through 5).
• BLOCK NR (noise reduction): Reduce the "block noise"
or the mosaic like patterns that appear on your screen.
• Y (luminance) NR: This reduces the noise contained in
the luminance element of the image's video signal.
• C (chroma) NR: This reduces the noise contained in the
colour (chroma) element of the image's video signal.
• CHROMA DELAY: Adjust this when the colour of
images on your screen appear to have shifted
horizontally.
• PICTURE: Changes the contrast.
• BRIGHTNESS: Changes the overall brightness.
• COLOR: Makes the colours deeper or lighter.
• HUE: Changes the colour balance.
• SHARPNESS: This will sharpen the outline of images.
• GAMMA: This will adjust the washed out or darkened
areas of an image. See "Gamma Correction" on the next
page for more information.
1
Select "VIDEO CONTROL" using M /m and press
ENTER.
1 2 ( 2 7 )
1 8 ( 3 4 )
C 1 : 3 2 : 5 5
PB MEMORYt
PB MEMORYt
MEMORY 1t
MEMORY 2t
VIDEO CONTROL
Select:
2
Select "PB MEMORYt" or memory number you
want to adjust using M /m and press ENTER.
The VIDEO CONTROL display appears.
PB MEMORY
VIDEO CONTROL
BLOCK NR
Y NR
C NR
CHROMA DELAY
Select: Cancel:
ENTER
DVD
Cancel:
ENTER RETURN
0
0
0
0
1/3
RETURN
41