Step 2: Connecting The Audio Cords - Sony DVP-NS300 Operating Instructions Manual

Step 2: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. The surround effects
you will enjoy depend on the connections and components you use.
Select a connection
Select one of the following connections,
Connection
(page 20)
A
(page 21)
B
(page 21)
B
(page 22)
C
(page 23)
D
* Manufactured under license from Dolby Laboratories. "Dolby," "Pro Logic," and the double-D symbol are
trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories. All rights
reserved.
** "DTS" is a registered trademark of Digital Theater Systems, Inc.
A
Components to be connected
TV (stereo)
Stereo amplifier (receiver)
(having L and R audio input jacks only, or having a digital input jack)
2 speakers
(front L and R)
MD deck/DAT deck
AV amplifier (receiver) with a Dolby* Surround (Pro Logic) decoder
(having L and R audio input jacks only, or having a digital input jack)
3 speakers
(front L and R, and rear (monaural))
6 speakers
(front L and R, center, rear L and R, and subwoofer)
AV amplifier (receiver) having a Dolby Digital, MPEG audio or DTS**
decoder and a digital input jack
6 speakers
(front L and R, rear L and R, center, and subwoofer)
through .
D
continued
19