Step 3: Connecting The Power Cord; Step 4: Quick Setup - Sony DVP-NS300 Operating Instructions Manual

Step 3: Connecting the Power Cord

Plug the player and TV power cords (mains lead) into an AC outlet (mains).
Do not connect the power cord (mains lead) of your player to a "switched" power source (mains)
of an amplifier (receiver). Otherwise, when you turn off the power of your amplifier (receiver),
the settings for the player may be lost.

Step 4: Quick Setup

Follow the steps below to make the minimum number of basic adjustments to use the player. To
skip an adjustment, press >. To return to the previous adjustment, press ..
POWER
A Turn on the TV.
B Switch the input selector on the TV to the player.
C Press POWER on the player and press [/1 on the remote.
"Press [ENTER] to run QUICK SETUP" appears at the bottom of the screen. If this message
does not appear, select "QUICK" under SETUP in the Control Menu (page 13) to run Quick
Setup.
D Press ENTER without inserting a disc.
The Setup Display for selecting the language used for the on-screen display appears.
The available languages differ depending upon the player model.
E Press X/x to select a language.
The player uses the language selected here to display the DVD menu and subtitles as well.
ENTER
./> X/x
LANGUAGE SETUP
OSD:
DVD MENU:
AUDIO:
SUBTITLE:
ENGLISH
ENGLISH
CHINESE 1
CHINESE 2
[/1
./>
X/x
ENTER
continued
25