Checking For Focus Right After Shooting - Canon PowerShot S5 IS User Manual

Checking for Focus Right After Shooting

Shooting Mode
You can check whether the image is in focus right after it is
recorded.
1
Shoot.
The recorded image displays for about 2 seconds (or the
interval set with the [Review] feature (p. 29)).
2
Press the DISP. button (or the SET button)
while the image is displayed.
The number of times the DISP. button
is pressed depends upon the display
settings for the LCD monitor (p. 15).
Press the DISP. button repeatedly
until the screen at the right appears.
Displays as follows.
- Camera is focused: AF frame for the
image that has been shot displays in
white, and an orange frame appears
within the focused frame.
- Camera is not focused: An orange frame displays at the
center of the image that has been shot.
- Contents within the orange frame can be confirmed at the
bottom right. Zoom magnification can be changed using
the zoom lever (p. 104).
- You can change the display position within the orange
frame using the MENU button or the
To Cancel Checking the Focus:
Press the shutter button halfway.
48
Recorded image
Orange frame contents
, , or button.