Checking For Focus Right After Shooting - Canon Digital IXUS-65 User Manual

Checking for Focus Right After Shooting

You can check whether the image is in focus right after it is
recorded.
1
Shoot.
The recorded image displays for about 2 seconds (or the
interval set with the Review feature p.27).
2
Press
played.
The number of times the DISP.
button is pressed depends upon
the display settings for the LCD
monitor (see settings below).
Press the DISP. button repeatedly
until the screen at the right
appears.
Displays as follows.
- Camera is focused: AF frame for
the image that has been shot dis-
plays in green, and an orange frame appears within the
focused frame.
- Camera is not focused: Image that has been shot dis-
plays, and an orange frame displays at the center of the
image.
- Contents of the orange frame can be confirmed at the bot-
tom right.
You can switch between AF frames and change the display
position (p. 67) using the MENU button or the FUNC./SET
button.
To cancel: press the shutter button halfway.
66
(or ) while the image is dis-
Shooting Mode
Recorded Image
Orange frame contents