Canon PowerShot S5 IS User Manual page 63

1
Use the
Swap)
The camera will switch to color input
mode, and the display will alternate
between the original image and the
color swap image (using the
previously set color).
2
Aim the camera so that the color you wish to
change appears at the center of the LCD
monitor (or viewfinder) and press the
button.
Only one color can be specified.
ou can use the
Y
colors that are retained.
-5: Only takes the color that you want to change.
+5: Also takes colors close to the one that you want to change.
3
Aim the camera so that the desired color
appears at the center of the LCD monitor (or
viewfinder) and press the
Only one color can be specified.
4
Complete the setting with the ISO button,
and shoot.
When you press the Movie button, you can shoot movies in
Color Swap mode.
The default setting for Color Swap changes green into white.
You may not obtain the expected results after color input
mode if you use the flash.
The colors specified in the Color Swap mode are retained
even if the camera's power is turned off.
or button to select
ISO button.
or button to specify the range of the
(Color
button.
61