Using Conversion Lenses (Sold Separately) - Canon PowerShot S5 IS User Manual

Using Conversion Lenses
(Sold Separately)
When attaching the Wide Converter WC-DC58A, Tele-converter TC-
DC58B, and Close-up Lens 500D (58mm) (each sold separately)
you also need the Conversion Lens Adapter LA-DC58E (included
with the separately sold Lens Adapter/Hood Kit LAH-DC20).
When attaching the wide converter, tele-converter or
close-up lens, be sure to screw it on securely. If they come
loose, they may fall from the lens adapter, posing risk of
injury from shattered glass.
Never look into the sun or into strong light through the wide
converter, tele-converter or close-up lens as this can result
in blindness or impairment of vision.
If the built-in flash is used with the lens hood attached, the
outer edges of shot images (especially the lower right) may
be darkened.
When using the tele-converter, set the camera near the
maximum telephoto. At other zoom settings, the image will
appear as if its corners have been cut off.
When using the wide converter, set the camera to the
maximum wide angle.
Wide Converter WC-DC58A
Use this converter for taking wide-angle shots. The wide converter
changes the focal length of the camera body's lens by a factor of
0.75x (the thread diameter is 58 mm).
Tele-converter TC-DC58B
This lens is used for taking telephoto shots. The lens changes the
focal length of the camera body's lens by a factor of 1.5x. (the
thread diameter is 58 mm).
It is not possible to attach a lens hood or filter to the wide
converter or tele-converter.
167