Canon PowerShot S5 IS User Manual page 84

2
Press the shutter button halfway.
The
will blink blue (however, when the
viewfinder display, the
will not blink).
3
Press the
shutter button halfway. When the
button lights, press the shutter button all
the way.
When you press the
button is still pressed halfway, the ISO speed returns to its
original setting.
If you set AE lock (p. 84) after the ISO speed is raised, the
camera remains in the mode for changing ISO speed even
when the shutter button is released (the button remains lit
blue until AE lock is released).
You cannot enable this setting in
when using the flash.
Depending on the shooting conditions, the
shake warning) icon may not disappear even after the ISO
speed is raised.
82
appears and the
button while still pressing the
button
button
button again while the shutter
, or mode, or
(camera