Checking For Focus Right After Shooting - Canon PowerShot G7 User Manual

Checking for Focus Right After Shooting
[!]
fD)
seN
PTv AvM
46
You can check whether the image is in focus right after it is recorded.
Shoot.
• The recorded image displays for about 2 seconds (or the
interval set with the Review feature (p. 27)).
Press
DQ~~~i;-'
displayed.
• The number of times the DISPLAY
Recorded Image
button is pressed depends upon the
display settings for the LCD monitor
(See below). Press the DISPLAY
button repeatedly until the screen at
the right appears.
• Displays as follows.
- Camera is focused: AF frame for
Orange frame contents
the image that has been shot
displays in white, and an orange frame appears within the
focused frame.
- Camera is not focused: image that has been shot displays,
and an orange frame displays at the center of the image.
• Contents of the orange frame can be confirmed at the
bottom right. Zoom can be used (p. 89).
• You can switch between AF frames and change the display
position (p. 47) using the MENU button or the", .. , ... or
.. button.
To Cancel Checking the Focus:
Press the shutter button halfway.
• can an
the image is displayed (See Basic Guide p.
• Pressing the DISPLAY button will change the display on the
LCD monitor as follows.
Focus Confirmation
-7
Detailed
-7
Standard