Checking For Focus Right After Shooting; To Cancel Checking The Focus - Canon PowerShot SD750 Digital ELPH User Manual

70
You can check whether the image is in focus right after it is recorded.
Shoot.
eThe'recorded image displays for about 2 seconds (or the
interval set with the· Review function p. 24).
Press
e
(or
@>
while the
Recorded Image
image is displayed.
eThe number of times the DISP. but-
ton is pressed depends upon the
display settings for the LCD monitor
(See below). Press the DISP. button
repeatedly until the screen at the
right appears.
Orange frame contents
e Displays as follows.
- Camera is focused: the AF frames are displayed in the
recorded image in white and the frame that is in focus has
an orange frame within it.
- Camera is not focused: an orange frame appears at the
centre of the recorded image.
- Contents of the orange frame can be confirmed at the bot-
tom right, you can change the display magnification of the
area within the orange frame with the zoom lever.
e You can switch between orange frames and change the dis-
play position (p. 71) using the MENU button or the FUNC./
SET button.
To Cancel Checking the Focus
Press the shutter button halfway.
e You can delete an image by pressing the button while
the image is displayed, except in the display position
change mode (See Basic Guide, p. 20).
e Pressing the DISP. button will change the display on the
LCD monitor as follows.
Focus Confirmation
-+
Detailed
-+
No Information