Nokia Customer Care
Page 4 –10
PKD-1
SW security device is a piece of hardware enabling the use of the
service software when connected to the parallel (LPT) port of the PC.
Without the device, it is not possible to use the service software.
Printer or any such device can be connected to the PC through the
device if needed.
RJ-51 PA
To be used with ST-30!
RJ-72
To be used with rework stencil ST-32.
RJ-79
The soldering jig RJ-79 is used for soldering and as a rework jig for
system module. It is made of lead-free rework compatible material.
SA-41
SA-41 RF Coupler is used for Go/No-Go test after changing components
in the RF part of the phone.
The SA-41 is mounted on the docking station adapter.
Note:
For RF attenuation values, please refer to the Service
bulletin.
COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
SW security device
Rework jig
Rework jig
Soldering jig
RF Coupler
RM-291
Service Tools
Issue 1