Check Vibra Function Using "Vibra Control - Nokia RM-291 Service Manual

RM-291
Baseband troubleshooting Nokia Customer Care

Check vibra function using "Vibra control"

Steps
1. Connect phone with Phoenix.
2. Open "Vibra control" window from "Testing -> Vibra control", as shown in the figure below.
3. Select suitable intensity value, for example 53 %.
4. Select "Vibra state" as "Enabled"
5. Click "Write".
6. Check if Vibra works.
Figure 89 Checking vibra function by using vibra control
Issue 1 COMPANY CONFIDENTIAL Page 6 –23
Copyright © 2007 Nokia. All rights reserved.