Nokia RM-291 Service Manual page 64

Nokia Customer Care
4. Select Manual mode, and click Next to continue.
i For FLS-4S POS Flash Device, choose the following connection settings:
• Media: FBUS
• COM Port: Virtual COM Port used by FLS-4
Note: ALWAYS check this. Go to Windows→Control Panel→FLS Virtual Port→Configuration .
ii For FPS-8 Flash Prommer, choose the following connection settings:
• Media: FPS-8
• Port Num: COM Port where FPS-8 is connected
• COMBOX_DEF_MEDIA: FBUS
5. Click Finish to complete the configuration.
Page 3 –26
Figure 38 Select mode: Manual
Figure 39 FLS virtual port icon
COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
RM-291
Phoenix service SW
Issue 1