Nokia RM-291 Service Manual page 79

RM-291
Phoenix service SW Nokia Customer Care
12. Click OK to see the current JBV-1 status (after a successful update).
Figure 69 JBV-1 SW update done
Figure 70 JBV-1 SW status
You have now updated the software of your JBV-1 docking station and it is ready for use.
Next actions
If you have several docking stations you need to update, disconnect the power and USB cables from the
previous one and connect them to the next docking station. First, click Refresh Status to see the current SW
version and then Update Firmware to update the software.
JBV-1 Firmware Update dialog box.
After you have updated all docking stations, close the
Issue 1 COMPANY CONFIDENTIAL Page 3 –41
Copyright © 2007 Nokia. All rights reserved.