Custom White Balance
You can adjust the white balance to the light source at the shooting location.
Make sure that you set the white balance under the light source of the actual
scene you will shoot.
If you change camera settings after recording white balance data, the tone
may not turn out properly.
Manually Correcting the White Balance
You can manually correct the white balance. This adjustment will have the
same effect as using a commercially-available color temperature conversion
filter or color compensating filter.
●
In Step 2 above, choose
●
Make sure the entire screen is filled with a
plain, white colored subject, then press the
n button (l button in 8 mode).
The tint on the screen will change when a
white balance data is set.
Choose the white balance.
●
After pressing the m button, press the
op buttons to choose
qr buttons or turn the Ê dial to choose an
option.
Adjust the setting.
Turn the ÷ dial, and adjust the correction
●
amount for B and A.
Press the l button to display the
●
adjustments screen.
Adjusting the White Balance
or
, then press the
.
85