Charging The Battery; Insert The Battery; Charge The Battery; Remove The Battery - Canon PowerShot G12 User Manual

Charging the Battery

Use the included charger to charge the battery. Be sure to charge the battery
as it is not charged at the time of purchase.
To protect the battery and prolong its life, do not charge it for longer than
24 hours continuously.
Approximate Number of Shots That Can Be Taken
Number of Shots
Playback Time (Hours)
• The number of shots that can be taken is based on the Camera & Imaging Products
Association (CIPA) measurement standard.
• Under some shooting conditions, the number of shots that can be taken may be less
than mentioned above.
14
Remove the cover.

Insert the battery.

●

Charge the battery.

●
●
CB-2LZ
CB-2LZE

Remove the battery.

●
LCD Monitor On
LCD Monitor Off
Align the o marks on the battery and
charger, then insert the battery by sliding it
in ( ) and down (
For CB-2LZ: Flip out the plug (
plug the charger into a power outlet (
For CB-2LZE: Plug the power cord into
the charger, then plug the other end into a
power outlet.
The charge lamp lights orange and charging starts.
The charge lamp will light green when
charging has finished. Charging takes
approx. 2 hours and 20 minutes.
Unplug the battery charger from the power
outlet, then remove the battery by sliding it
in ( ) and up (
).
) and
).
370
1000
7
).