Canon PowerShot G12 User Manual page 185

• Be sure the cords from the Off Camera Shoe Cord, Macro Ring Lite or
Macro Twin Lite do not obstruct or interfere with the flash.
• While shooting with a tripod, adjust the direction of the camera so that
the flash heads do not contact the tripod or bracket.
• Depending on the placement of the controller, it may come into contact
with the LCD monitor.
• Use the screen for shooting. The viewfinder cannot be used.
8 mode is not available.
•
Using an Externally Mounted Flash (Sold Separately)
Set [ND Filter] to [On].
● After pressing the m button, press the
op buttons to choose
qr buttons or use the Ê dial to choose
.
Configure the externally mounted
flash.
●
Follow Step 4 on p. 181. to make settings.
Shoot.
●
You can shoot in E-TTL automatic flash
exposure compensation mode by setting
the camera to either G, B, or M
modes.
●
When the scene is too bright, set the
aperture values in B or D, then shoot.
, then press the
185