Canon PowerShot G12 User Manual page 57

What if the number of shots is set to two or more shots?
• Exposure and white balance settings are set with the first shot.
• If the flash fires or you set a high number of shots, the shooting interval may take
longer than usual.
• If the memory card becomes full, shooting stops automatically.
When you set the time delay for more than 2 seconds, the self-timer lamp
and sound speed up 2 seconds before the shutter releases (when the flash
will fire, the lamp lights).
Choose Q.
● Press the op buttons or turn the Ê dial
to choose Q. Immediately turn the ÷ dial
to choose a delay time, then press the qr
buttons to choose the number of shots,
and press m button.
Once set, Q will appear on the screen.
Shoot.
●
Press the shutter button halfway to focus
on the subject, then press it fully.
When the self-timer starts, the lamp blinks
and the self-timer sound plays.
●
To cancel shooting with the timer after
countdown has started, press the p
button.
●
To restore the original setting, choose
in Step 2.
Using the Self-Timer
57