Red-Eye Correction - Canon PowerShot G12 User Manual

If the electronic level does not appear in Step 1, press the n button to
•
display the 4 tab. Choose [Custom Display], then add
• If you tilt the camera too far forward or backward, the electronic level will turn
gray, and you will not be able to use it to level the camera.
• The electronic level will not appear while shooting a movie.
• Holding the camera vertically will change the orientation of the electronic
level.
• If you can't shoot levelly even when using the electronic level, calibrate
the electronic level (p. 166), then try again.

Red-Eye Correction

You can automatically correct red-eye that occurs in images taken with the
flash.
Level the camera.
●
Adjust the camera's tilt on the left and right
sides so that the center of the electronic
level turns green.
Choose [Flash Control].
● Press the n button to choose [Flash
Control] in the 4 tab, then press the m
button.
Adjust the setting.
Press the op buttons or turn the Ê dial
●
to choose [Red-Eye Corr.], then press the
qr buttons to choose [On].
Once set, Πwill appear on the screen.
Red-Eye Correction
to or .
109