Canon PowerShot G12 User Manual page 114

Changing the Color and Shooting
Using the flash may cause unexpected results in this mode.
Color Swap
You can swap one color in an image for another when recording it. You can
only swap one color.
114
●
Choose a negative value to limit the range
of colors. Choose a positive value to
extend the range of colors to similar colors.
Pressing the l button restores the
●
shooting screen.
Choose Y.
● Follow Steps 1 – 2 on p. 62 to choose Y.
Press the l button.
The unchanged image and the Color Swap
image will alternately display.
●
The default setting is to change green to
gray.
Specify the color to be swapped.
●
Position the center frame so it is filled with
the color you want and press the q button.
The specified color will be recorded.