Determining The Installation Position; Mounting The Ap; Mounting Bracket; Mounting The Ap On A Wall - H3C WA6636 Installation Manual

Determining the installation position

Determine the installation position by observing the following principles:
•
Few obstacles such as wall exist between the AP and clients.
•
The AP is far away from electronic devices (such as microwave oven) that might generate
radio frequency (RF) noise.
•
The AP does not hinder people's daily work and life.
•
The place is not water seeping, water soaking, and condensing.

Mounting the AP

IMPORTANT:
• Before mounting the AP on a wall or ceiling, connect cables to the AP.
• Install an M3 × 23.5 security screw as required.
The AP can be installed only indoors. You can mount the AP on a wall or a ceiling.

Mounting bracket

Figure2-2 Mounting bracket
(1) Installation hole for securing the mounting bracket to a wall or ceiling (point A)
(2) T-rail installation hole (reserved) (Point B)
(3) Auxiliary hole for securing cables by using cable tie (point C)
(4) Security hole for an M3 × 23.5 security screw

Mounting the AP on a wall

1. Place the mounting bracket against the wall and mark the installation holes on the wall.
2-2