Check/Replace Filter Drain Pan O-Rings - Henny Penny WENDY'S EVOLUTION ELITE EEE-151 Operator's Manual

3-18. CHECK/REPLACE FILTER
DRAIN PAN O-RINGS
Figure 1
Figure 2
Figure 3
Aug. 2011
To prevent oil leaking, and to keep filtering process operating
properly, the filter drain pan o-rings should be inspected for
nicks and tears at least every 3 months. Figure 1
1. Open the door, lift-up on the drain pan stop and pull-out the
filter drain pan assembly, using the handle on the drain pan.
Figures 2 & 3
This pan could be hot! Use protective cloth or glove, or
severe burns could result.
2. Visually check the 3 o-rings on the tube of the filter drain
pan for any cracks or breaks and replace if necessary.
3. To replace o-ring, use a small, flat-bladed screwdriver, pry
up on o-ring and pull off of end of tube. Roll new o-ring
into notch on tube. Lubricate o-rings on filter tube with
fresh, cold oil and push filter drain pan into position.
45
Figure 4