Set Password Settings - JETWAY XBLUE-78VA2 User Manual

Table of Contents

Advertisement

Pressing <Y> loads the default values that are factory settings for optimal performance
system operations.
3-15 Password Settings
Set Supervisor Password
Set User Password
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
You can set either supervisor or user password, or both of them. The differences are:
Supervisor password:
User password: Can only enter but do not have the right to change the options of the
setup menus. When you select this function, the following message will appear at the
center of the screen to assist you in creating a password.
ENTER PASSWORD:
Type the password, up to eight characters in length, and press <Enter>. The password
typed now will clear any previously entered password from CMOS memory. You will
be asked to confirm the password. Type the password again and press <Enter>. You
may also press <Esc> to abort the selection and not enter a password.
To disable a password, just press <Enter> when you are prompted to enter the password.
A message will confirm that the password will be disabled. Once the password is
disabled, the system will boot and you can enter Setup freely.
PASSWORD DISABLED.
When a password has been enabled, you will be prompted to enter it every time you try to
enter Setup. This prevents an unauthorized person from changing any part of your system
configuration.
Additionally, when a password is enabled, you can also require the BIOS to request a
password every time your system is rebooted. This would prevent unauthorized use of
your computer.
You determine when the password is required within the BIOS Features Setup Menu and
its Security option. If the Security option is set to "System", the password will be
required both at boot and at entry to Setup. If set to "Setup", prompting only occurs
when trying to enter Setup.
Phoenix – AwardBIOS CMOS Setup Utility
Password Settings
Press Enter
Press Enter
F6:Optimized Defaults
Can enter and change the options of the setup menus.
Menu Level >
F7:Standard Defaults
37
Item Help

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xblue-78ga2

Table of Contents