JVC GR-DV3000A Service Manual page 99

Hide thumbs Also See for GR-DV3000A:
Table of Contents

Advertisement

38
EN
NOTES:
● During Night-Scope, the following functions or settings
cannot be activated and its indicator blinks or goes out:
• Some modes of "Programme AE With Special Effects"
(
pg. 38, 39).
• "GAIN UP" in the CAMERA Menu (
• "DIS" in the MANUAL Menu (
● During Night-Scope, it may be difficult to bring the
camcorder into focus. To prevent this, use of manual
focus and/or a tripod is recommended.
Power Switch
Lock Button
PROG.AE Button
MENU Wheel
Display
SHUT T
ER
1/120
SPORT
S
SNOW
SPOT L
G I HT
TW I L I
GHT
SEP I A
MONOT
ONE
CLASS
I C F I LM
STROB
E
pg. 29).
pg. 29).
NIGHT Button
Menu Screen
ADVANCED FEATURES
Night-Scope
Makes dark subjects or areas even brighter than they
would be under good natural lighting. Although the
recorded image is not grainy, it may look as if it is
strobing due to the slow shutter speed.
1
Set the Power Switch to "
the Lock Button located on the switch. Pull out the
viewfinder fully or open the LCD monitor fully.
2
Press NIGHT so that the Night-Scope indicator
"
" appears.
• The shutter speed is automatically adjusted to
provide up to 30 times sensitivity.
• "A" appears beside "
being automatically adjusted.
To Deactivate Night-Scope . . .
..... press NIGHT again so that the Night-Scope
indicator disappears.
Programme AE With Special Effects
1
Set the Power Switch to "
the Lock Button located on the switch. Pull out the
viewfinder fully or open the LCD monitor fully.
2
Press MENU wheel in. The Menu Screen
appears.
3
Rotate the MENU wheel to select "
GRAM AE", then press it.
4
Rotate the MENU wheel to select the desired
mode (
pg. 39), then press it. Selection is
complete.
5
Press the MENU wheel in again. The Menu
Screen closes.
6
Press PROG.AE so that the selected effect
indicator appears.
To Deactivate The Selected Mode . . .
..... press PROG.AE again so that the effect indicator
disappears.
NOTES:
● Programme AE with special effects can be changed
during recording or during Record-Standby.
● Some modes of Programme AE special effects cannot
be used during Night-Scope.
IMPORTANT
Some modes of Programme AE with special effects
cannot be used with certain Fade/Wipe Effects
(
pg. 37). If an unusable mode is selected, its
indicator blinks or goes out.
(cont.)
" while pressing down
" while the shutter speed is
" while pressing down
PRO-

Advertisement

Table of Contents
loading

Table of Contents