Table of Contents
Advertisement
Power Switch
SNAPSHOT
Button
Lock Button
COPY
–
OF F
I MA E
G
NA GATION
VI
Play/Pause Button (4/6)
MENU Wheel
VIDEO/MEMORY Switch
(Open the LCD monitor
to access this switch.)
Display
SP
SP
6
6
Dubbing Still Images Recorded On A Tape
To A Memory Card
Still images can be dubbed from a tape to a memory
card.
1
Load a memory card (
(
pg. 12).
2
Set the VIDEO/MEMORY Switch to "VIDEO", then
set the Power Switch to "
the Lock Button.
3
Press the MENU wheel in. The Menu Screen
appears. Rotate it to select "
The VIDEO Menu appears.
4
Rotate the MENU wheel to select "
COPY" and press it. The Sub Menu appears. Rotate it
to select "IMAGE" and press it. Selection is complete.
5
Rotate the MENU wheel to select "
and press it twice. The normal playback screen
reappears.
6
To select a video image to be dubbed, start
playback by pressing 4/6. At the moment you find
the image you wish to dub, press it again to engage
Still Playback.
7
To start dubbing, press SNAPSHOT. The selected
image is stored on the memory card.
• "
" blinks during dubbing.
NOTES:
● If SNAPSHOT is pressed in step 7 when a memory
card is not loaded, the message "COPYING FAILED" is
displayed.
● If an image recorded on the tape using the WIDE mode
(
pg. 30) is dubbed to a memory card, the WIDE
mode identifying signal is not dubbed with it.
● To use Playback Special Effects with a video image you
wish to dub, perform up to step 7 using the remote
control (provided) (
pg. 65).
● Images are dubbed in 640 x 480 pixels.
61
EN
pg. 13) and cassette
" while pressing down
VIDEO" and press it.
RETURN"
Advertisement
Table of Contents
