Table of Contents
Advertisement
8
EN
Battery pack
BN-V408U,
BN-V416U or
BN-V428U
POWER
indicator
CHARGE indicator
Battery pack
BN-V408U
BN-V416U (optional)
BN-V428U (optional)
NOTES:
● If the protective cap is attached to the battery pack, remove it first.
● Perform charging where the temperature is between 10°C and 35°C. 20°C to 25°C is the ideal temperature range for
charging. If the environment is too cold, charging may be incomplete.
● Charging times noted above are for a fully discharged battery pack.
● Charging time varies according to the ambient temperature and the status of the battery pack.
● To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.
● If you connect the camcorder's DC cord to the adapter during battery charging, power is supplied to the camcorder and
charging stops.
● Since the AC Power Adapter/Charger processes electricity internally, it becomes warm during use. Be sure to use it
only in well-ventilated areas.
● When charging the battery pack for the first time or after a long storage period, the CHARGE indicator may not light. In
this case, remove the battery pack from the AC Power Adapter/Charger, then try charging again.
● If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and
needs to be replaced. Please purchase a new one.
Lithium-ion is vulnerable in colder temperatures.
To AC outlet
AC Power
Adapter/
Charger
DC OUT connector
Fully charging time
approx. 1 hr. 30 min.
approx. 2 hrs.
approx. 3 hrs. 20 min.
Power
This camcorder's 2-way power supply system lets
you choose the most appropriate source of power. Do
not use provided power supply units with other
equipment.
CHARGING THE BATTERY PACK
1
Make sure you unplug the camcorder's DC cord
from the AC Power Adapter/Charger. Plug the AC
Adapter/Charger's power cord into an AC outlet. The
POWER indicator lights.
2
Attach the battery pack with the
aligned with the corresponding marks on the AC
Power Adapter/Charger. The CHARGE indicator
begins blinking to indicate charging has started.
3
When the CHARGE indicator stops blinking but
stays lit, charging is finished. Slide the battery and lift
off. Remember to unplug the AC Adapter/Charger's
power cord from the AC outlet.
About Batteries
DANGER! Do not attempt to take the batteries apart,
or expose them to flame or excessive heat, as it may
cause a fire or explosion.
WARNING! Do not allow the battery or its terminals
to come in contact with metals, as this can result in a
short circuit and possibly start a fire.
The Benefits Of Lithium-Ion Batteries
Lithium-ion battery packs are small but have a large
power capacity. However, when one is exposed to
cold temperatures (below 10°C), its usage time
becomes shorter and it may cease to function. If this
happens, place the battery pack in your pocket or
other warm, protected place for a short time, then re-
attach it to the camcorder. As long as the battery pack
itself is not cold, it should not affect performance.
(If you're using a heating pad, make sure the battery
pack does not come in direct contact with it.)
GETTING STARTED
mark
Advertisement
Table of Contents
